2.9
Setting the Locate LED
Use the locate button and locate LED to identify a server module within a fully
populated chassis.
From a remote location: Use the ILOM to turn the locate LED on and off.
■
Co-located: Push and release the locate button to make the locate LED blink for 30
■
minutes (fast blink: 4Hz).
▼ To Light the Locate LED Using the ILOM Web
Interface
1. Access the ILOM Web Interface.
2. On the Web Interface, navigate to System Monitoring - Indicators.
3. Select the radio button next to /SYS/LOCATE.
4. Select: Turn LED On, or Set LED to Fast Blink, from the drop-down
menu.
▼ To Light the Locate LED Using the ILOM CLI
●
Type: set /SYS/LOCATE value=Fast_Blink
▼ To Darken the Locate LED Using the ILOM CLI
●
Type: set /SYS/LOCATE value=Off
2-14
Sun Blade X6275 Server Module Service Manual • September 2013