Servicing The Midplane Assembly (Fru) - Oracle X7-8 Service Manual

Servicing the Midplane Assembly (FRU)

This locking action is accompanied by a click sound.
3. Install power supply PS3.
See "Install a Power Supply" on page
4. Prepare the server for operation.
See "Returning the Server to Operation" on page
Verify that the Power OK indicator on the PS indicator panel turns on steady
5.
after power is supplied to the server and the server is in Main power mode.
6. Clear any related component faults.
Related Information
"Clear Hardware Fault Messages (Oracle ILOM)" on page 51
■
Servicing the Midplane Assembly (FRU)
This section describes how to service the server midplane assembly. Use this procedure to
remove and replace a failed bus bar midplane assembly. The following topics and procedures
provide information to assist you when removing and installing the midplane assembly:
230 Oracle Server X7-8 Service Manual • April 2018
144.
245.