Oracle X7-8 Cpu Packages - Oracle X7-8 Service Manual

Call
Out
1
2
3
4
5
6
7
8

Oracle X7-8 CPU Packages

Before you can configure different socket modes for Oracle Server X7-8, you need to obtain the
required Oracle X7-8 CPU Module Packages from Oracle. Contact your sales representative for
information about ordering the CPU module packages.
Oracle Server X7-8 CPU Module package includes one CMOD. Each CMOD supports one
processor (CPU). To produce a dual 4-socket server or a single 8-socket server, you need
to order four CPU module packages. In a dual 4-socket configuration, the two sides of the
system can support either identical or different processor SKUs and memory. In an 8-socket
configuration, System A must have Intel Xeon 81xx series processors installed, and System A
and System B processor SKUs and memory (capacity and number of DIMMs per CMOD) must
be identical.
Processor and memory options for each CPU module package include the following:
Description
Locate button/LED (chassis SMOD0 System A)
Fault-Service Required (chassis SMOD0 System A)
System OK (chassis SMOD0 System A)
On/Standby button (chassis SMOD0 System A) (recessed)
SP OK (chassis SMOD0 System A)
System Overtemperature Warning (chassis SMOD0 System A)
Rear Fault-Service Required LED (chassis SMOD0 System A back panel)
CMOD Eight Fault-Service Required LEDs 0-7
Oracle X7-8 CPU Packages
Configuring the System Socket Modes 257