Power Off The Server For Immediate Shutdown (Oracle Ilom Cli) - Oracle X7-8 Service Manual

Power Off the Server for Immediate Shutdown (Oracle ILOM CLI)

Related Information
"Controls and Indicators" on page 70
■
"Power Off the Server Gracefully (Oracle ILOM CLI)" on page 111
■
"Power Off the Server for Immediate Shutdown (Oracle ILOM Web
■
Interface)" on page 115
"Power On the Server" on page 246
■
Power Off the Server for Immediate Shutdown
(Oracle ILOM CLI)
Caution -
system data during an immediate power-down, so use this procedure to power off the server
only after attempting the graceful power-down procedure.
1. Log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example, open an SSH session, and at
the command line type:
ssh root@
Where ipaddress is the IP address of the server SP.
For more information, see
The Oracle ILOM CLI prompt appears: ->
2. From the CLI prompt, type the following command:
->
stop -f /System
The server powers down immediately.
3. Disconnect the power and data cables from the server.
See "Remove Power" on page
Caution -
mode. Power is still directed to the service processor remote management subsystem and power
supply fans. To completely power off the server, you must disconnect the power cords from the
power supplies.
114 Oracle Server X7-8 Service Manual • April 2018
This procedure quickly forces the server Main power off. You might corrupt your
ipaddress
"Using Oracle ILOM" in Oracle Server X7-8 Installation
117.
When you power off the server using Oracle ILOM, the server enters Standby power
Guide.