Remove A Power Supply - Oracle X7-8 Service Manual

Call Out
1
2
3
4

Remove a Power Supply

You might need to remove power supplies to replace a PS or to access the release latch for the
front indicator module (FIM).
Prepare the server for hot service.
1.
See "Preparing the Server for Component Replacement" on page
This procedure can also be completed as a warm service or cold service procedure.
Note -
2. Identify the power supply that requires removal.
Access this component directly from the front of the server. View LEDs when the server is in
Standby power mode.
The following status indicators (LEDs) are lit when a power supply fault is detected:
Front and back Fault-Service Required LEDs
■
Amber Fault-Service Required LED on the faulty power supply
■
Description
AC3 System A (SMOD0)
AC2 System A (SMOD0)
AC1 System B (SMOD1)
AC0 System B (SMOD1)
Remove a Power Supply
100.
Servicing Components 141