Configure Totalizers And Inventories - Emerson Micro Motion 5700 Configuration And Use Manual

Configure advanced options for process measurement
Table 6-1: Options for Discrete Input Action and Enhanced Event Action
Action
Increment batch preset
(1) The ProLink III v4.0 field label is "Start Smart Meter Verification" for both Discrete Input Action and Enhanced Event Action. This field
label does not match the table entry.
6.5

Configure totalizers and inventories

Display
ProLink III
Web browser
Overview
The transmitter provides seven configurable totalizers and seven configurable inventories.
Each totalizer and each inventory can be configured independently.
Totalizers track the process since the last totalizer reset. Inventories track the process since
the last inventory reset. Inventories are typically used to track the process across totalizer
resets.
Tip
The default configurations cover the most typical uses of totalizers and inventories. You may not
need to change any configurations.
Prerequisites
Before configuring the totalizers and inventories, ensure that the process variables you
plan to track are available on the transmitter.
Procedure
1.
2.
90
Display
Increment Preset
Menu > Configuration > Process Measurement > Totalizers & Inventories
Device Tools > Totalizer Control > Totalizers
Configuration > Totalizers/Inventories
Select the totalizer or inventory that you want to configure.
Set Totalizer Source or Inventory Source to the process variable that the totalizer or
inventory will track.
Option Description
Mass flow The totalizer or inventory will track Mass Flow Rate and calculate total
mass since the last reset.
Volume flow The totalizer or inventory will track Volume Flow Rate and calculate to-
tal volume since the last reset.
Label
ProLink III
Increment Batch Preset
Micro Motion Model 5700 with Ethernet Transmitters
(continued)
Web browser
Increment Preset