Read Totalizer And Inventory Values; Start And Stop Totalizers And Inventories - Emerson Micro Motion 1500 Configuration And Use Manual

Alert data structure Contents
Alert Statistics One record for each alert (by alert number)
that has occurred since the last master reset.
Each record contains:
•
•
Recent Alerts 50 most recent alert postings or alert clearings Not cleared; maintained across transmitter
8.5

Read totalizer and inventory values

ProLink III
Field Communicator Service Tools > Variables > Totalizer Control
Overview
Totalizers keep track of the total amount of mass or volume measured by the transmitter
since the last totalizer reset. Inventories keep track of the total amount of mass or volume
measured by the transmitter since the last inventory reset.
Tip
You can use the inventories to keep a running total of mass or volume across multiple totalizer
resets.
8.6

Start and stop totalizers and inventories

ProLink III
Field Communicator Service Tools > Variables > Totalizer Control > All Totalizers > Start Totalizers
Overview
When you start a totalizer, it tracks process measurement. In a typical application, its value
increases with flow. When you stop a totalizer, it stops tracking process measurement and
its value does not change with flow. Inventories are started and stopped automatically,
when totalizers are started and stopped.
Configuration and Use Manual
Transmitter action if condition occurs
A count of the number of occurrences
Timestamps for the most recent posting
and clearing
View the desired variable on the main screen under Process Variables.
Device Tools > Totalizer Control > Totalizer and Inventories > Start All Totals
Device Tools > Totalizer Control > Totalizer and Inventories > Stop All Totals
Service Tools > Variables > Totalizer Control > All Totalizers > Stop Totalizers
Clearing
Not cleared; maintained across transmitter
power cycles
power cycles
Transmitter operation
99