Alert History And Log - Emerson Micro Motion 5700 Configuration And Use Manual

Log files, history files, and service files
4.
14.2.1

Alert history and log

The transmitter automatically saves information about all alert occurrences to its working
memory, and periodically updates an alert history file on its SD card. The alert history log is
an ASCII file.
Contents of alert history
The alert history in the transmitter's working memory contains the 1000 most recent alert
records. Each alert record contains the following information:
•
•
•
•
Alert history and power-cycles
If the transmitter is rebooted or power-cycled, the 20 most recent records in alert history
are retained in the transmitter's working memory. All earlier records are cleared from
working memory. The alert history file on the SD card is not cleared.
Alert history and configuration files
If you restore the factory configuration or upload a configuration file, alert history is not
affected.
198
Specify the folder on the USB drive where the log file will be saved.
Name of alert or condition
Category:
- F=Failure
- FC=Function Check
- M=Maintenance Required
- OOS=Out of Specification
- I=Ignore
Action:
- Active=Transition from inactive to active
- Inactive=Transition from active to inactive
- Toggling=More than 2 transitions in the last 60 seconds
Timestamp
- Format: Military time
- Time and time zone: Transmitter clock
- Not displayed if Action=Toggling
Micro Motion Model 5700 with Ethernet Transmitters