Configure Totalizers And Inventories - Emerson Micro Motion 5700 Configuration And Use Manual

Configure advanced options for process measurement
June 2019
• Using ProLink III: Choose Device Tools → Configuration → I/O → Inputs → Action Assignment.
Then assign the desired action to the desired enhanced event.
Using the Field Communicator: Choose Configure → Alert Setup → Enhanced Events. Then assign
•
the desired action to the desired enhanced event.
Options for Enhanced Event Action
Action
Standard
Start sensor zero
Totalizers
Start/stop all totalizers and
inventories
Reset totalizer X
Reset all totalizers and
inventories
Concentration measurement
Increment CM matrix
Batching
Begin batch
End batch
Resume batch
Increment batch preset
Inhibit batch totalizer
Inhibit batch
Inhibit batch flow

6.5 Configure totalizers and inventories

Menu → Configuration → Process Measurement → Totalizers & Inventories
Display
Device Tools → Totalizer Control → Totalizers
ProLink III
Configure → Manual Setup → Measurements → Optional Setup → Configure Totalizers
Field Communicator
The transmitter provides seven configurable totalizers and seven configurable inventories. Each totalizer and
each inventory can be configured independently.
Totalizers track the process since the last totalizer reset. Inventories track the process since the last inventory
reset. Inventories are typically used to track the process across totalizer resets.
102
Display
Start Zero Calibration
Start/stop all totalizers
Reset Total X
Reset All Totals
Increment Matrix
Begin Batch
End Batch
Resume Batch
Increment Preset
Inhibit Totalizer
Inhibit Batch
Inhibit Flow
Configuration and Use Manual
Label
PLIII
Start Sensor Zero
Start or Stop All Totalizers
Totalizer X
Reset All Totals
Increment ED Curve
Begin Batch
End Batch
Resume Batch
Increment Batch Preset
Inhibit Batch Totalizing
Inhibit Batch Start
Allow Batch End with Flow
Micro Motion 5700 Transmitters with Intrinsically Safe Outputs
MMI-20039472
FC
Start Sensor Zero
Start/Stop All Totals
Reset Total X
Reset All Totals
Increment Curve
Start Batch
End Batch
Resume Batch
Increment Preset
Inhibit Batch Totalizing
Inhibit Batch Start
Allow Batch End with Flow