Upgrade The Transmitter Firmware Using Prolink Iii; Reboot The Transmitter - Emerson Micro Motion 5700 Configuration And Use Manual

Maintenance
13.2.2

Upgrade the transmitter firmware using ProLink III

You can upgrade the transmitter firmware to stay current with development and to take
advantage of any new features.
Prerequisites
You must have the firmware upgrade files provided by Micro Motion.
Procedure
1.
2.
3.
4.
5.
Related information
13.3

Reboot the transmitter

Display
ProLink III
Web browser
Overview
For certain configuration changes to take effect, the transmitter must be rebooted. You
must also reboot the transmitter in order to clear certain status alerts.
Rebooting the transmitter has the same effect as power-cycling the transmitter.
Prerequisites
Follow appropriate procedures to select the appropriate time for rebooting the
transmitter. The reboot typically takes about 10 seconds.
188
Choose Device Tools > Transmitter Software Update.
Navigate to the folder containing the firmware upgrade files.
Click Update.
Note
If required, the transmitter upgrade procedure automatically includes an upgrade to the core
processor software.
If you chose to reboot the transmitter at a later date, you can reboot it from the
display, or you can power-cycle it.
Verify the transmitter configuration and all safety parameters.
Enable write-protection.
Reboot the transmitter
Menu > Menu > Service Tools > Reboot Transmitter
Not available
Not available
Micro Motion Model 5700 with Ethernet Transmitters