Upgrade The Transmitter Firmware; Upgrade The Transmitter Firmware Using The Display - Emerson Micro Motion 5700 Configuration And Use Manual

13.2

Upgrade the transmitter firmware

You can upgrade the transmitter firmware to stay current with development and to take
advantage of any new features.
•
•
13.2.1

Upgrade the transmitter firmware using the display

You can upgrade the transmitter firmware to stay current with development and to take
advantage of any new features.
Prerequisites
You must have the firmware upgrade files provided by Micro Motion.
The service port must be enabled. It is enabled by default. However, if you need to enable
it, choose Menu > Configuration > Security and set Service Port to On.
Procedure
1.
2.
3.
4.
5.
6.
Related information
Configuration and Use Manual
Upgrade the transmitter firmware using the display
Upgrade the transmitter firmware using ProLink III
Copy the folder containing the firmware upgrade files to a USB drive.
Open the wiring compartment and insert the USB drive into the service port.
CAUTION!
If the transmitter is in a hazardous area, do not open the wiring compartment. Contact
customer support.
Choose Menu > USB Options > USB Drive --> Transmitter > Update Device Software.
Select the firmware upgrade folder and follow the prompts.
Note
If required, the transmitter upgrade procedure automatically includes an upgrade to the core
processor software.
If you chose to reboot the transmitter at a later date, you can reboot it from the
menu, or you can power-cycle it.
Verify the transmitter configuration and all safety parameters.
Enable write-protection.
Reboot the transmitter
Maintenance
(Section 13.2.1)
(Section 13.2.2)
187