Battery Replacement - Emerson Micro Motion 5700 Configuration And Use Manual

Postrequisites
Check the transmitter clock. During the reboot, the transmitter clock is powered by the
battery, therefore the transmitter clock and all timestamps should be accurate. If the
transmitter clock is not correct, the battery may need replacement.
Related information
13.4

Battery replacement

The transmitter contains a battery that is used to power the clock when the transmitter is
not powered up. Users cannot service or replace the battery. If the battery requires
replacement, contact customer support.
If the battery is non-functional and the transmitter is powered down, then powered up, the
clock will restart from the time of the power-down. All timestamps will be affected. You
can correct the issue by resetting the transmitter clock. For a permanent resolution, the
battery must be replaced.
Related information
Configuration and Use Manual
Battery replacement
RoHS and WEEE
Maintenance
189