Perform A Ma Loop Test Using The Display - Emerson Micro Motion 5700 Configuration And Use Manual

•
•
•
•
•
•
•
•
•
•
•
•
•
15.17.1

Perform a mA loop test using the display

Prerequisites
Before performing a mA loop test, configure Channel C as a mA output.
Follow appropriate procedures to ensure that loop testing will not interfere with existing
measurement and control loops.
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
9.
Configuration and Use Manual
Follow appropriate procedures to ensure that loop testing will not interfere with
existing measurement and control loops.
Perform a mA loop test using the display
Perform a frequency output loop test using the display
Perform a discrete output loop test using the display
Perform a discrete input loop test using the display
Perform a mA loop test using ProLink III
Perform a frequency output loop test using ProLink III
Perform a discrete output loop tests using ProLink III
Perform a discrete input loop test using ProLink III
Perform a mA loop test using a web browser
Perform a frequency output loop test using a web browser
Perform a discrete output loop test using a web browser
Perform a discrete input loop test using a web browser
Choose Menu > Service Tools > Output Simulation and select the mA output.
Set Simulation Value to 4.
Start the simulation.
Read the mA current at the receiving device and compare it to the transmitter
output.
The readings do not need to match exactly. If the values are slightly different, you
can correct the discrepancy by trimming the output.
Choose New Value.
Set Simulation Value to 20.
Start the simulation.
Read the mA current at the receiving device and compare it to the transmitter
output.
The readings do not need to match exactly. If the values are slightly different, you
can correct the discrepancy by trimming the output.
Choose Exit.
(Section 15.17.1)
(Section 15.17.2)
(Section 15.17.3)
(Section 15.17.4)
(Section 15.17.5)
(Section 15.17.6)
(Section 15.17.7)
(Section 15.17.8)
(Section 15.17.9)
(Section 15.17.10)
(Section 15.17.11)
(Section 15.17.12)
Troubleshooting
231