Sample Sensor Tags; Flow Calibration Parameters (Fcf, Ft) - Emerson Micro Motion 5700 Configuration And Use Manual

2.8.1

Sample sensor tags

Figure 2-1:
Figure 2-2:
2.8.2

Flow calibration parameters (FCF, FT)

Two separate values are used to describe flow calibration: a 6-character FCF value and a 4-
character FT value. They are provided on the sensor tag.
Both values contain decimal points. During characterization, these are entered as a single
10-character string. The 10-character string is called either Flowcal or FCF.
Configuration and Use Manual
Tag on older curved-tube sensors (all sensors except T-Series)
Tag on newer curved-tube sensors (all sensors except T-Series)
Quick start
11