Start, Stop, And Reset Totalizers Using A Web Browser - Emerson Micro Motion 5700 Configuration And Use Manual

•
•
•
•
10.4.3

Start, stop, and reset totalizers using a web browser

You can start and stop each totalizer or inventory independently. You can start and stop all
totalizers as a group. You can reset each totalizer or inventory independently. You can
reset all totalizers as a group. You can reset all inventories as a group.
When a totalizer or inventory is started, its value increases or decreases depending on the
interaction of the flow direction parameters. It continues tracking flow until it is stopped.
When a totalizer or inventory is reset, its value is set to 0. You can reset a totalizer or
inventory while it is started or while it is stopped.
Procedure
•
•
Configuration and Use Manual
2. Click Start All Totals or Stop All Totals.
To reset a single totalizer:
1. Choose Device Tools > Totalizer Control > Totalizers.
2. Scroll to the totalizer that you want to reset, and click Reset.
To reset a single inventory:
1. Choose Device Tools > Totalizer Control > Inventories.
2. Scroll to the inventory that you want to reset, and click Reset.
To reset all totalizers as a group:
1. Choose Device Tools > Totalizer Control > Totalizers.
2. Click Reset All Totals.
To reset all inventories as a group:
1. Choose Device Tools > Totalizer Control > Inventories.
2. Click Reset All Inventories.
To start, stop, or reset totalizers:
1. Choose Operations > Totalizers.
2. Choose from the available operations.
Option
Start
Stop
Reset
Start all Totalizers
Stop all Totalizers
Reset all Totalizers
To start, stop, or reset inventories:
Description
Start an individual totalizer.
Stop an individual totalizer.
Reset an individual totalizer to zero.
Start all totalizers at the same time.
Stop all totalizers at the same time.
Reset all totalizers to zero at the same time.
Transmitter operation
153