Start, Stop, And Reset Totalizers And Inventories - Emerson Micro Motion 5700 Configuration And Use Manual

Transmitter operation
March 2019

12.4 Start, stop, and reset totalizers and inventories

12.4.1 Start, stop, and reset totalizers using the display
You can start and stop each totalizer or inventory independently. You can start and stop all totalizers and
inventories as a group. You can reset each totalizer or inventory independently. You can reset all totalizers
and inventories as a group.
When a totalizer or inventory is started, its value increases or decreases depending on the interaction of the
flow direction parameters. It continues tracking flow until it is stopped.
When a totalizer or inventory is reset, its value is set to 0. You can reset a totalizer or inventory while it is
started or while it is stopped.
Prerequisites
To stop, start, or reset a single totalizer or inventory, the totalizer or inventory must be configured as a display
variable.
To reset an inventory using the display, this function must be enabled. To enable inventory reset using the
display, choose Menu > Configuration > Securityand set Totalizer Reset to Allowed. Note that this affects
only the display functions. Resetting inventories using other tools is not affected.
Procedure
• To start or stop a single totalizer or inventory:
a) Wait or scroll until the totalizer or inventory appears on the display.
b) Choose Options.
c) Choose Start or Stop.
• To start or stop all totalizers and inventories as a group:
a) Choose Menu > Operations > Totalizers.
b) Choose Start or Stop.
• To reset a single totalizer or inventory:
a) Wait or scroll until the totalizer or inventory appears on the display.
b) Choose Options.
c) Choose Reset.
• To reset all totalizers and inventories as a group:
a) Choose Menu > Operations > Totalizers.
b) Choose Reset All.
192 Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
MMI-20025166