Displaying Measured Curves; Using The Energy-Saving Profile - Siemens SINUMERIK 840D sl Operating Manual

Ctrl Energy

13.4 Displaying measured curves

References
Information on the configuration is provided in the following reference:
System Manual "Ctrl Energy", SINUMERIK 840D sl / 828D
13.4 Displaying measured curves
Procedure
13.5

Using the energy-saving profile

In the "SINUMERIK Ctrl-Energy energy-saving profile" window, you can display all of the
defined energy-saving profiles. Here, directly activate the required energy-saving profile - or
inhibit or release profiles.
SINUMERIK Ctrl-Energy energy-saving profiles
Display
Energy-saving profile
active in [min]
Note
Disable all energy-saving profiles
For example, in order not to disturb the machine while measurements are being made,
select "Disable all".
274
1. The "SINUMERIK Ctrl-Energy Analysis" window is opened and you
have already performed measurements.
2. Press the "Graphic" and "Saved measurements" softkeys.
The measurement curves are displayed in the window "SINUMERIK
Ctrl-Energy analysis".
3. Press the softkey "Saved measurements" again if you only want to see
the actual measurement.
Meaning
All energy-saving profiles are listed.
The remaining time up until the defined profile is reached is
displayed.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal