Remote Diagnostics; Alarms And Messages - Siemens SINUMERIK 840Di sl Operating Manual

8
Diagnostics operating area
8.2

Remote diagnostics

8.2

Remote diagnostics

ePS
Network
References
8.3

Alarms and messages

Alarms
Reset
Cycle Start
Messages
8-394
The control can be operated externally over a remote connection (e.g.
modem) The ePS Network Services software is installed with HMI-
Advanced. The program is started using the "ePS Network" softkey
when selecting the operating areas.
For further information about remote diagnostics, please refer to:
•
Function Manual: ePS Network Services
• /FBFE/ Description of Functions: Remote diagnostics
Function
You can display a list of alarms and messages and acknowledge
them.
Sequence of operations
Alarms:
The alarm overview displays all active alarms with alarm numbers,
date, clearance criteria and descriptions.
Clear the alarm by pressing the key that is displayed as a symbol:
Switch device off and on again (main switch) or NCK POWER ON
Press "Reset" key.
Press "Alarm Cancel" key.
Alarm is cleared by "NC Start".
Alarm is cleared with the "Recall" key.
Messages:
PLC operational messages that do not have to be acknowledged (as
standard) (configurable).
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8
01/2008
© Siemens AG 2008 All rights reserved.