Static - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

static

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2448
static mac-address {
interface interface-names;
vlan-assignment (vlan-id |vlan-name );
}
[edit protocols dot1x authenticator authentication-profile-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure MAC addresses to exclude from 802.1X authentication. The static MAC list
provides an authentication bypass mechanism for supplicants connecting to a port,
permitting devices such as printers that are not 802.1X-enabled to be connected to the
network on 802.1X-enabled ports.
Using this 802.1X authentication-bypass mechanism, the supplicant connected to the
MAC address is assumed to be successfully authenticated and the port is opened for it.
No further authentication is done for the supplicant.
You can optionally configure the VLAN that the supplicant is moved to or the interfaces
on which the MAC address can gain access from.
mac-address —The MAC address of the device for which 802.1X authentication should
be bypassed and the device permitted access to the port.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show dot1x static-mac-address on page 2484
Example: Configuring Static MAC Bypass of Authentication on a J-EX Series Switch on
page 2281
Configuring 802.1X Interface Settings (CLI Procedure) on page 2331
Configuring 802.1X Authentication (J-Web Procedure) on page 2332
Understanding Static MAC Bypass of Authentication on J-EX Series Switches