Dell PowerConnect J-EX4200-24T Software Manual page 2684

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Verification
Purpose
Action
2612
authentication-profile-name profile52;
interface {
ge-0/0/14.0 {
supplicant single;
}
}
}
}
TIP: If you wanted to configure IP source guard on the voice VLAN as well as
on the data VLAN, you would configure DHCP snooping and IP source guard
exactly as you did for the data VLAN. The configuration result for the voice
VLAN under
secure-access-port
secure-access-port {
vlan voice {
examine-dhcp;
ip-source-guard;
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying That 802.1X User Authentication Is Working on the Interface on page 2612
Verifying the VLAN Association with the Interface on page 2613
Verifying That DHCP Snooping and IP Source Guard Are Working on the Data
VLAN on page 2613
Verifying That 802.1X User Authentication Is Working on the Interface
Verify the 802.1X configuration on interface
Verify the 802.1X configuration with the operational mode command
user@switch> show dot1x interface ge-0/0/14.0 detail
ge-0/0/14.0
Role: Authenticator
Administrative state: Auto
Supplicant mode: Single
Number of retries: 3
Quiet period: 60 seconds
Transmit period: 30 seconds
Mac Radius: Disabled
Mac Radius Restrict: Disabled
Reauthentication: Enabled
Configured Reauthentication interval: 3600 seconds
Supplicant timeout: 30 seconds
Server timeout: 30 seconds
Maximum EAPOL requests: 2
Guest VLAN member: <not configured>
Number of connected supplicants: 1
Supplicant: user101, 00:04:0f:fd:ac:fe
would look like this:
.
ge-0/0/14
show dot1x interface
: