Dell PowerConnect J-EX4200-24T Software Manual page 2609

Table 319: show ethernet-switching interfaces Output Fields (continued)
Field Name Field Description
Tagging Specifies whether the interface forwards 802.1Q-tagged or untagged traffic.
Blocking The forwarding state of the interface:
unblocked
blocked
Disabled by bpdu control
on a protected interface. If the
in the BPDU configuration, the interface automatically returns to service after
the timer expires.
blocked by RTG
blocked by STP
error.
MAC limit exceeded
limiting error. The disabled interface is automatically restored to service when
the disable timeout expires.
MAC move limit exceeded
move limiting error. The disabled interface is automatically restored to service
when the disable timeout expires.
Storm control in effect
control error. The disabled interface is automatically restored to service when
the disable timeout expires.
The VLAN index internal to the Junos OS.
Index
The C-VLAN to S-VLAN mapping information:
mapping
dot1q-tunneled
bundling).
native
S-VLAN.
push
policy-mapped
integer—The interface maps packets to the specified S-VLAN.
show show
ethernet-switching ethernet-switching
interfaces interfaces
—Traffic is forwarded on the interface.
—Traffic is not being forwarded on the interface.
—The interface is disabled due to receiving BPDUs
disable-timeout
—The specified redundant trunk group is disabled.
—The interface is disabled due to a spanning tree protocol
—The interface is temporarily disabled due to a MAC
—The interface is temporarily disabled due to a MAC
—The interface is temporarily disabled due to a storm
—The interface maps all traffic to the S-VLAN (all-in-one
—The interface maps untagged and priority tagged packets to the
—The interface maps packets to a firewall filter to an S-VLAN.
—The interface maps packets to a specifically defined S-VLAN.
user@switch> show ethernet-switching interfaces
Interface State VLAN members
ae0.0 up default
ge-0/0/2.0 up vlan300
ge-0/0/3.0 up default
ge-0/0/4.0 down default
ge-0/0/5.0 down default
ge-0/0/6.0 down default
ge-0/0/7.0 down default
ge-0/0/13.0 up default
ge-0/0/14.0 up vlan100
vlan200
ge-0/0/15.0 up vlan100
vlan200
Chapter 92: Operational Mode Commands for Rate Limiting
statement has been included
Tag Tagging Blocking
untagged unblocked
300 untagged blocked by RTG (rtggroup)
blocked by STP
MAC limit exceeded
MAC move limit exceeded
Storm control in effect
unblocked
untagged unblocked
100 tagged unblocked
200 tagged unblocked
100 tagged blocked by STP
200 tagged blocked by STP
Level of Output
All levels
none, brief , detail ,
summary
detail
detail
2537