Dell PowerConnect J-EX4200-24T Software Manual page 2869

Table 347: Terms Configuration Parameters (continued)
Field Function
Local Preference Specifies the BGP local preference attribute.
Class of Service Specifies and applies the class-of-service parameters to routes
installed into the routing table.
Source class
The value entered here maintains the packet counts for a
route passing through your network, based on the source
address.
Destination class
The value entered here maintains packet counts for a route
passing through your network, based on the destination
address in the packet.
Forwarding class
Related
Documentation
Configuring BGP Sessions (J-Web Procedure) on page 1431
Configuring an OSPF Network (J-Web Procedure) on page 1435
Configuring a RIP Network (J-Web Procedure) on page 1439
Configuring Static Routing (J-Web Procedure) on page 1444
Layer 3 Protocols Supported on J-EX Series Switches on page 13
Chapter 102: Configuring Firewall Filters
Your Action
Select the action and type a value.
Type the source class.
Type the destination class.
Type the forwarding class.
2797