If-Exceeding - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

if-exceeding

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2824
if-exceeding {
bandwidth-limit bps;
bandwidth-percentpercent
burst-size-limit bytes;
}
[edit firewall policer policer-name]
[edit logical-systems logical-system-name firewall policer policer-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure policer rate limits.
The bandwidth-percent statement is supported on routers only.
The remaining statements are explained separately.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on J-EX Series
Switches on page 2755
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 2788
Understanding the Use of Policers in Firewall Filters on page 2752
Rate Limiting
Single-Rate Two-Color Policer Overview
Configuring a Single-Rate Two-Color Policer