Dell PowerConnect J-EX4200-24T Software Manual page 3021

}
Hierarchy Level
[edit]
Release Information Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Description Configure class-of-service (CoS) parameters on J-EX Series switches.
The remaining statements are explained separately.
Default If you do not configure any CoS features, the default CoS settings are used.
Required Privilege interface—To view this statement in the configuration.
Level interface-control—To add this statement to the configuration.
Related
Documentation
map-name {
forwarding-class class-name scheduler scheduler-name;
}
}
schedulers {
scheduler-name {
buffer-size (percent percentage | remainder);
drop-profile-map loss-priority loss-priority protocol protocol drop-profile profile-name;
priority priority;
shaping-rate (rate | percent percentage);
transmit-rate (rate | percent percentage | remainder);
}
}
Example: Configuring CoS on J-EX Series Switches on page 2883
Defining CoS Code-Point Aliases (CLI Procedure) on page 2914 or Defining CoS Code-Point
Aliases (J-Web Procedure) on page 2912
Defining CoS Classifiers (CLI Procedure) on page 2914 or Defining CoS Classifiers (J-Web
Procedure) on page 2916
Defining CoS Forwarding Classes (CLI Procedure) on page 2918 or Defining CoS
Forwarding Classes (J-Web Procedure) on page 2918
Configuring CoS Tail Drop Profiles (CLI Procedure) on page 2925
Defining CoS Schedulers (CLI Procedure) on page 2920 or Defining CoS Schedulers
(J-Web Procedure) on page 2920
Defining CoS Rewrite Rules (CLI Procedure) on page 2925 or Defining CoS Rewrite Rules
(J-Web Procedure) on page 2926
Assigning CoS Components to Interfaces (CLI Procedure) on page 2928 or Assigning CoS
Components to Interfaces (J-Web Procedure) on page 2928
Chapter 111: Configuration Statements for CoS
2949