Verifying That The Port Error Disable Setting Is Working Correctly - Dell PowerConnect J-EX4200-24T Software Manual

Meaning
Related
Documentation

Verifying That the Port Error Disable Setting Is Working Correctly

Purpose
Action
0 proxy requests not proxied
0 restricted-proxy requests not proxied
0 with bogus interface
0 with incorrect length
0 for non-IP protocol
0 with unsupported op code
0 with bad protocol address length
0 with bad hardware address length
0 with multicast source address
0 with multicast target address
0 with my own hardware address
168705 for an address not on the interface
0 with a broadcast source address
0 with source address duplicate to mine
29555 which were not for me
0 packets discarded waiting for resolution
4 packets sent after waiting for resolution
27 ARP requests sent
47 ARP replies sent
0 requests for memory denied
0 requests dropped on entry
0 requests dropped during retry
0 requests dropped due to interface deletion
0 requests on unnumbered interfaces
0 new requests on unnumbered interfaces
0 replies for from unnumbered interfaces
0 requests on unnumbered interface with non-subnetted donor
0 replies from unnumbered interface with non-subnetted donor
The statistics show that two proxy ARP requests were received, and the
field indicates that all the unproxied ARP requests received have been proxied
not proxied
by the switch.
Configuring Proxy ARP (CLI Procedure) on page 1153
Verify that the port error disable setting is working as expected on MAC limited, MAC
move limited and rate-limited interfaces on a J-EX Series switch.
Display information about interfaces:
user@switch> show ethernet-switching interfaces
Interface State VLAN members
ge-0/0/0.0 up T1122
ge-0/0/1.0 down default
ge-0/0/2.0 down default
ge-0/0/3.0 down default
ge-0/0/4.0 down default
ge-0/0/5.0 down default
ge-0/0/6.0 down default
ge-0/0/7.0 down default
ge-0/0/8.0 down default
ge-0/0/9.0 up T111
ge-0/0/10.0 down default
ge-0/0/11.0 down default
ge-0/0/12.0 down default
Chapter 96: Verifying Port Security
proxy requests
Blocking
unblocked
MAC limit exceeded
MAC move limit exceeded
Storm control in effect
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
2663