Dell PowerConnect J-EX4200-24T Software Manual page 2859

Table 345: Advanced Options for Terms (continued)
Table Function
ICMP Code Specifies more specific information than ICMP type. Because the value's
meaning depends upon the associated ICMP type, you must specify
icmp-type
type with which they are associated.
DSCP Specifies the Differentiated Services code point (DSCP). The DiffServ
protocol uses the type-of-service (ToS) byte in the IP header. The most
significant six bits of this byte form the DSCP.
Precedence Specifies IP precedence.
NOTE: IP precedence and DSCP number cannot be specified together
for the same term.
IP Options Specifies the presence of the options field in the IP header.
Interface Specifies the interface on which the packet is received.
Ether type Specifies the Ethernet type field of a packet.
NOTE: This option is not applicable for a routing filter.
Dot 1q user Specifies the user-priority field of the tagged Ethernet packet.
priority User-priority values can be 0–7.
In place of the numeric value, you can specify one of the following text
synonyms (the field values are also listed)
background (1)—Background
best-effort (0)—Best effort
controlled-load (4)—Controlled load
excellent-load (3)—Excellent load
network-control (7)—Network control reserved traffic
standard (2)—Standard or Spare
video (5)—Video
voice (6)—Voice
NOTE: This option is not applicable for a routing filter.
VLAN Specifies the VLAN to be associated with the packet.
NOTE: This option is not applicable for a routing filter.
TCP Flags Specifies one or more TCP flags.
NOTE: TCP flags are supported on ingress ports, VLANs, and router
interfaces.
along with The keywords are grouped by the ICMP
icmp-code.
Chapter 102: Configuring Firewall Filters
Your Action
Select a value from the list.
Select the DSCP number from
the list.
Select the option from the list.
Select the option from the list.
Select the interface from the list.
Select a value from the list.
Select a value from the list.
Select the VLAN from the list.
Select the option
TCP Initial
enter a combination of TCP
flags.
or
2787