Management-Address - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

management-address

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
maximum-requests
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2420
management-address ip-management-address;
[edit protocols lldp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify the management address of the switch to be used in the LLDP Management
type, length, and value (TLV) .
LLDP Management TLV uses the IP address of the switch's management Ethernet
interface ( ) or the IP address of the virtual management Ethernet (VME) interface
me0
if the switch is a Virtual Chassis.
ip-management-address —Management address for the switch.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2489
Understanding 802.1X and LLDP and LLDP-MED on J-EX Series Switches on page 2261
J-EX Series Switches Interfaces Overview on page 863
maximum-requests number;
[edit protocols dot1x authenticator interface (all | [interface-names])]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
For 802.1X authentication, configure the maximum number of times an EAPOL request
packet is retransmitted to the supplicant before the authentication session times out.
Two retransmission attempts
number —Number of retransmission attempts.
Range: 1 through 10
Default: 2
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring 802.1X Interface Settings (CLI Procedure) on page 2331
Configuring 802.1X Authentication (J-Web Procedure) on page 2332