Dell PowerConnect J-EX4200-24T Software Manual page 2852

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
2780
Configure the family address type for the firewall filter:
1.
For a firewall filter that is applied to a port or VLAN, specify the family address type
to filter Layer 2 (Ethernet) packets and Layer 3 (IP) packets, for
ethernet-switching
example:
[edit firewall]
user@switch# set family ethernet-switching
For a firewall filter that is applied to a Layer 3 (routed) interface:
To filter IPv4 packets, specify the family address type
[edit firewall]
user@switch# set family inet
To filter IPv6 packets, specify the family address type
[edit firewall]
user@switch# set family inet6
NOTE: You can configure firewall filters for both IPv4 and IPv6 traffic
on the same Layer 3 interface.
Specify the filter name:
2.
[edit firewall family ethernet-switching]
user@switch# set filter ingress-port-filter
The filter name can contain letters, numbers, and hyphens (-) and can have a maximum
of 64 characters. Each filter name must be unique.
If you want to apply a firewall filter to multiple interfaces and name individual firewall
3.
counters specific to each interface, configure the
[edit firewall family ethernet-switching filter ingress-port-filter]
user@switch# set interface-specific
Specify a term name:
4.
[edit firewall family ethernet-switching filter ingress-port-filter]
user@switch# set term term-one
The term name can contain letters, numbers, and hyphens (-) and can have a
maximum of 64 characters.
A firewall filter can contain one or more terms. Each term name must be unique within
a filter.
NOTE: For J-EX4200 switches, the maximum number of terms allowed
per firewall filter is 2048. For J-EX8200 switches, the maximum number
of terms allowed per firewall filter is 32768. If you attempt to configure a
firewall filter that exceeds these limits, the switch returns an error message
when you commit the configuration.
inet , for example:
inet6 , for example:
option:
interface-specific