Dell PowerConnect J-EX4200-24T Software Manual page 2911

Table 350: show firewall Output Fields
Field Name Field Description
Filter Name of a filter that has been configured with the
When an interface-specific filter is displayed, the name of the filter is followed by the full interface
name and by either
When dynamic filters are displayed, the name of the filter is followed by the full interface name and
by either
displayed, the name of the filter is prefixed with two underscore (__) characters and the name of the
logical system (for example,
Display filter counter information:
Counters
Display policer information:
Policers
for an input filter or
-i
for an input filter or
-in
__ls1/filter1
Name —Name of a filter counter that has been configured with the
—Number of bytes that match the filter term under which the
Bytes
—Number of packets that matched the filter term under which the
Packets
—Name of policer.
Name
—Number of packets that matched the filter term under which the policer action is specified.
Packets
This is only the number of out-of-specification (out-of-spec) packet counts, not all packets policed
by the policer.
Chapter 106: Operational Mode Commands for Firewall Filters
filter statement at the
for an output filter.
-o
for an output filter. When a logical system–specific filter is
-out
).
[edit firewall] hierarchy level.
counter firewall filter action.
action is specified.
counter
action is specified.
counter
2839