Dell PowerConnect J-EX4200-24T Software Manual page 2866

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 346: Policies Global Configuration Parameters (continued)
Field Function
AS Path Specifies an AS path. This is
applicable to BGP only.
Table 347: Terms Configuration Parameters
Field Function
Term Name Specifies a term name.
Source tab
Family Specifies an address family protocol.
Routing Instance Specifies a routing instance.
RIB Specifies the name of a routing table.
Preference Specifies the individual preference value for the route.
Metric Specifies a metric value. You can specify up to four metric
values.
Interface Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP).
Prefix List Specifies a named list of IP addresses. You can specify an exact
match with incoming routes.
Protocol Specifies the name of the protocol from which the route was
learned or to which the route is being advertised.
2794
Your Action
To add an AS path:
1. Click .
Add
2. Enter the AS path name.
3. Enter the regular expression and click
4. Click .
OK
To edit an AS path, click . Edit the settings and click
Edit
To delete an AS path, select it and click
.
OK
.
OK
.
Delete
Your Action
Type or select and edit the name.
Select a value from the list.
Select a value from the list.
Select a value from the list
Type or select and edit the value.
Type or select and edit the value.
To add an interface, select
Add >
. Select the interface from the
Interface
list.
To add an address, select Add > Address
Select the address from the list.
To remove an interface, select it and click
.
Remove
Click . Select the prefix list from the
Add
list and click OK .
To remove a prefix list, select it and click
.
Remove
Click Add and select the protocol from
the list.
To remove a protocol, select it and click
.
Remove
.