Dell PowerConnect J-EX4200-24T Software Manual page 2710

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Related
Documentation
2638
Click Add .
1.
Type the allowed MAC address and click
2.
Repeat this step to add more allowed MAC addresses.
Click when you have finished setting MAC limits.
OK
6.
Click after the configuration has been successfully delivered.
OK
7.
NOTE: You can enable or disable port security on the switch at any time by
clicking the
Activate
page. If security status is shown as
any VLANs or interfaces (ports), a message asking whether you want to
enable port security appears.
Configuring MAC Limiting (CLI Procedure) on page 2635
Example: Configuring Allowed MAC Addresses to Protect the Switch from DHCP
Snooping Database Alteration Attacks on page 2590
Example: Configuring MAC Limiting, Including Dynamic and Allowed MAC Addresses,
to Protect the Switch from Ethernet Switching Table Overflow Attacks on page 2576
Example: Configuring MAC Limiting to Protect the Switch from DHCP Starvation Attacks
on page 2583
Verifying That MAC Limiting Is Working Correctly on page 2657
Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces
(CLI Procedure) on page 2642
Understanding MAC Limiting and MAC Move Limiting for Port Security on J-EX Series
Switches on page 2557
.
OK
or button on the Port Security Configuration
Deactivate
when you try to edit settings for
Disabled