Defining Cos Code-Point Aliases (J-Web Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Related
Documentation

Defining CoS Code-Point Aliases (J-Web Procedure)

2912
Using the Class of Service Configuration pages, you can configure various CoS components
individually or in combination to define particular CoS services.
To configure CoS components :
In the J-Web interface, select Configure>Class of Service.
1.
On the Class of Service Configuration page, select one of the following options
2.
depending on the CoS component that you want to define. Enter information into the
pages as described in the respective table:
To define or edit CoS value aliases, select CoS Value Aliases .
To define or edit forwarding classes and assign queues, select Forwarding Classes.
To define or edit classifiers, select Classifiers .
To define or edit rewrite rules, select Rewrite Rules.
To define or edit schedulers, select Schedulers.
To define or edit virtual channel groups, select Interface Associations.
Click Apply after completing configuration on any Configuration page.
3.
Defining CoS Classifiers (J-Web Procedure) on page 2916
Defining CoS Code-Point Aliases (J-Web Procedure) on page 2912
Defining CoS Forwarding Classes (J-Web Procedure) on page 2918
Defining CoS Rewrite Rules (J-Web Procedure) on page 2926
Defining CoS Schedulers (J-Web Procedure) on page 2920
Assigning CoS Components to Interfaces (J-Web Procedure) on page 2928
You can use the J-Web interface to define CoS code-point aliases on a J-EX Series switch.
By defining aliases you can assign meaningful names to a particular set of bit values and
refer to them when configuring CoS components.
To define CoS code-point aliases:
Select >
1. Configure Class of Service
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select
"Using the Commit Options to Commit Configuration Changes (J-Web
Procedure)" on page 334 for details about all commit options.
> .
CoS Value Aliases
Commit Options
> . See
Commit