Interfaces (Cli Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

J series; j-ex series

Table of Contents

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

Documentation

Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces

(CLI Procedure)

Documentation

after the configuration has been successfully delivered.

NOTE: You can enable or disable port security on the switch at any time by

clicking the

page. If security status is shown as

any VLANs, a message asking whether you want to enable port security

Configuring MAC Move Limiting (CLI Procedure) on page 2639

Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC

Move Limiting, on a J-EX Series Switch on page 2569

Verifying That MAC Move Limiting Is Working Correctly on page 2661

Monitoring Port Security on page 2653

Understanding MAC Limiting and MAC Move Limiting for Port Security on J-EX Series

Switches on page 2557

If you set a MAC limit in your port security settings to apply to all interfaces on the J-EX

Series switch, you can override that setting for a particular interface by specifying action

action to override a MAC limit setting:

Set the MAC limit—for example, a limit of

[edit ethernet-switching-options secure-access-port]

user@switch# set interface all mac-limit 5 action drop

Then change the action for one interface (here,

don't need to specify a limit value.

[edit ethernet-switching-options secure-access-port]

user@switch# set interface ge–0/0/2 mac-limit action none

Configuring MAC Limiting (CLI Procedure) on page 2635

Configuring MAC Limiting (J-Web Procedure) on page 2637

Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC

Move Limiting, on a J-EX Series Switch on page 2569

Verifying That MAC Limiting Is Working Correctly on page 2657

button on the Port Security Configuration

when you try to edit settings for

) with this command. You

Chapters

Table of Contents