Dell PowerConnect J-EX4200-24T Software Manual page 2810

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 336: Supported Match Conditions Applicable to IPv6 Traffic for Firewall Filters on EX
Series Switches
Match Condition Description
Specifies the 128-bit address that is the final
destination-address
destination node address for the packet. The
ip-address
filter description syntax supports the text
representations for IPv6 addresses as
described in
Addressing Architecture.
Destination media access control (MAC)
destination-mac-address
address of the packet.
mac-address
You can define a destination MAC address
with a prefix, such as from
destination-mac-address
00:01:02:03:04:05/24. If no prefix is
specified, the default value 48 is used.
2738
For information about logical operators and how to use bit-field logical operations to
create expressions that are evaluated for matches, see "Understanding Firewall Filter
Match Conditions" on page 2748.
On J-EX Series Ethernet switches, you can apply a router firewall filter to both IPv4 and
IPv6 traffic. You can apply firewall filter match conditions to IPv6 traffic on Layer 3
interfaces, aggregated Ethernet interfaces, and loopback interfaces. Table 336 on page 2738
describes the match conditions you can specify when configuring a firewall filter for IPv6
traffic.
RFC 2373
, IP Version6
Supported Platforms and Bind Points
Ingress
J-EX4200— Layer 3
interfaces
J-EX8200—Layer 3
interfaces
J-EX4200—ports and
VLANs
J-EX8200—ports and
VLANs
Egress
J-EX4200—Layer 3
interfaces
J-EX8200—Layer 3
interfaces
J-EX4200—ports and
VLANs
J-EX8200—ports and
VLANs