Dell PowerConnect J-EX4200-24T Software Manual page 2667

Table 327: Components of Port Security Setup on Switch 1 with a DHCP Server Connected to
Switch 2
Properties
Switch hardware
VLAN name and ID
VLAN subnets
Trunk interface on both switches
Access interfaces on Switch 1
Access interface on Switch 2
Interface for DHCP server
Figure 73: Network Topology for Port Security Setup with Two Switches
on the Same VLAN
The components of the topology for this example are shown in Table 327 on page 2595.
Switch 1 is initially configured with the default port security setup. In the default
configuration on the switch:
Chapter 94: Examples: Port Security Configuration
Settings
One J-EX4200-24T (Switch 1), and an additional J-EX Series switch
(Switch 2)
, tag
employee-vlan 20
192.0.2.16/28
through
192.0.2.17 192.0.2.30
is subnet's broadcast address
192.0.2.31
ge-0/0/11
ge-0/0/1 , ge-0/0/2 , and ge-0/0/3
ge-0/0/1
on Switch 2
ge-0/0/1
2595