Test Policy - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

test policy

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
test policy test policy
2856
test policy policy-name prefix
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Test a policy configuration to determine which prefixes match routes in the routing table.
—Name of a policy.
policy-name
—Destination prefix to match.
prefix
All prefixes in the default unicast routing table (
same as or longer than the specific prefix are processed by the
policy. All prefixes accepted by the policy are displayed. The
evaluates a policy differently from the Border Gateway Protocol (BGP) import process.
When testing a policy that contains an
command uses the match condition. In contrast, BGP does not use the
test policy
match condition when evaluating the policy against routes learned from internal BGP
(IBGP) or external BGP (EGBP) multihop peers.
view
show policy damping on page 1886
test policy on page 2856
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> test policy test-statics 3.0.0.1/8
inet.0: 44 destinations, 44 routes (44 active, 0 holddown, 0 hidden)
Prefixes passing policy:
3.0.0.0/8 *[BGP/170] 16:22:46, localpref 100, from 10.255.255.41
AS Path: 50888 I
> to 10.11.4.32 via en0.2, label-switched-path l2
3.3.3.1/32 *[IS-IS/18] 2d 00:21:46, metric 0, tag 2
> to 10.0.4.7 via fxp0.0
3.3.3.2/32 *[IS-IS/18] 2d 00:21:46, metric 0, tag 2
> to 10.0.4.7 via fxp0.0
3.3.3.3/32 *[IS-IS/18] 2d 00:21:46, metric 0, tag 2
> to 10.0.4.7 via fxp0.0
3.3.3.4/32 *[IS-IS/18] 2d 00:21:46, metric 0, tag 2
> to 10.0.4.7 via fxp0.0
Policy test-statics: 5 prefixes accepted, 0 prefixes rejected
) that match prefixes that are the
inet.0
from
test policy
match condition in the
interface
clause in the specified
command
clause, the
from
interface