Dell PowerConnect J-EX4200-24T Software Manual page 2858

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 344: Create a New Term
Field Function
Term Name Specifies the name of the term.
Protocols Specifies the protocols to be associated with
the term.
Source Specifies the source IP address, MAC address,
and available ports.
NOTE: MAC address is specified only for
port/VLAN filters.
Destination Specifies the destination IP address, MAC
address, and available ports.
NOTE: MAC address is specified only for
port/VLAN filters.
Action Specifies the packet action for the term.
More Specifies advanced configuration options for
the filter.
Table 345: Advanced Options for Terms
Table Function
ICMP Type Specifies the ICMP packet type field. Typically, you specify this match
condition in conjunction with the protocol match condition to determine
which protocol is being used on the port.
2786
Your Action
Enter a name.
1. Click .
Add
2. Select the protocols.
3. Click OK .
To specify the IP address, click
address.
To specify the MAC address, click
MAC address.
To specify the ports (interfaces), click
the port number.
To delete the IP address, MAC address, or port details, select
it and click .
Remove
To specify the IP address, click
address.
To specify the MAC address, click
MAC address.
To specify the ports (interfaces), click
the port number.
To delete the IP address, MAC address, or port details, select
it and click .
Remove
Select one:
Accept
Discard
Select the match conditions as specified in Table 345 on
page 2786.
Select the packet action for the term as specified in Table 345
on page 2786.
and enter the IP
Add > IP
Add > MAC and enter the
and enter
Add > Ports
and enter the IP
Add > IP
Add > MAC and enter the
Add > Ports and enter
Your Action
Select the option from the list.