Configuring Port Security (J-Web Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Related
Documentation

Configuring Port Security (J-Web Procedure)

[edit ethernet-switching-options secure-access-port]
user@switch# set interface all allowed-mac 00:05:85:3A:82:80
user@switch# set interface all allowed-mac 00:05:85:3A:82:81
user@switch# set interface all allowed-mac 00:05:85:3A:82:83
Limit the number of times a MAC address can move from its original interface in one
5.
second—for example, set a MAC move limit of
exceeded:
On a single VLAN (here, the VLAN is
[edit ethernet-switching-options secure-access-port]
user@switch# set vlan employee–vlan mac-move-limit 5 action drop
On all VLANs:
[edit ethernet-switching-options secure-access-port]
user@switch# set vlan all mac–move-limit 5 action drop
Configure a trusted DHCP server on an interface (here, the interface is
6.
[edit ethernet-switching-options secure-access port]
user@switch# set interface ge–0/0/8 dhcp-trusted
Configuring Port Security (J-Web Procedure) on page 2627
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 2516
Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC
Move Limiting, on a J-EX Series Switch on page 2569
Example: Configuring DHCP Snooping, DAI , and MAC Limiting on a J-EX Series Switch
with Access to a DHCP Server Through a Second Switch on page 2593
Monitoring Port Security on page 2653
Port Security for J-EX Series Switches Overview on page 2545
To configure port security on a J-EX Series switch using the J-Web interface:
Select Configure > Security
1.
The VLAN List table lists all the VLAN names, VLAN identifiers, port members, and
port security VLAN features.
The table lists all the ports and indicates whether security features have
Interface List
been enabled on the ports.
5 with an action of
employee-vlan
> Port Security .
Chapter 95: Configuring Port Security
drop if the limit is
):
ge-0/0/8
):
2627