Table of Contents
Advertisement
1.7 Warning Labels
The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and maintain the
Manipulator safely.
Do not tear, damage, or remove the warning labels. Use meticulous care when handling
those parts or units to which the following warning labels are attached as well as the nearby
areas.
Location
A
B
C
D
E
C8 Rev.13
Warning Label
Setup & Operation 1. Safety
NOTE
To avoid getting hands or fingers
caught, fold the Arm and fix it with a
belt or a similar tool before removing
the base mounting screws.
Do not enter the work space when the
Manipulator is operating. It is
extremely hazardous since the Arm
may collide and cause serious safety
problems.
Do not touch the current-carrying parts
inside the Manipulator while the power
is ON. It may cause electrical shock.
When releasing the brakes, be careful
of the arm falling due to its own
weight.
This warning label is attached on the
Manipulator and optional brake
release box.
When the brake release box is used:
Details of procedures for releasing the
brakes using the brake release box
are described in the Manipulator
manuals.
Only authorized personnel should
perform sling work and operate a
crane and a forklift. When these
operations are performed by
unauthorized personnel, it is extremely
hazardous and may result in serious
bodily injury and/or severe equipment
damage to the robot system.
11
Advertisement
Table of Contents
