Cisco Ios Xr System Monitoring Command Reference For The Cisco Xr 12000 Series Router, Release 4.1 - Cisco XR 1200 series Command Reference Manual

nonrootcause
Examples This example shows how to enter non-root-cause configuration mode and display the commands that are
available under this mode:
RP/0/0/CPU0:router(config)# logging correlator rule state_rule type stateful
RP/0/0/CPU0:router(config-corr-rule-st)# nonrootcause
RP/0/0/CPU0:router(config-corr-rule-st-nonrc)# ?
alarm
clear
clear
commit
describe
do
exit
no
pwd
root
show
This example shows how to specify a non-root-cause alarm for Layer 2 local SONET messages with an alarm
severity of 4. The non-root-cause alarm is associated with the correlation rule named state_rule.
RP/0/0/CPU0:router(config-corr-rule-st-nonrc)# alarm L2 SONET_LOCAL ALARM
Related Commands
Command
logging events buffer-size, on page 27
logging events level, on page 31
logging events threshold, on page 33
show logging events info, on page 62

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

40
Specify non-root cause alarm: Category/Group/Code combos
Clear the uncommitted configuration
Clear the configuration
Commit the configuration changes to running
Describe a command without taking real actions
Run an exec command
Exit from this submode
Negate a command or set its defaults
Commands used to reach current submode
Exit to the global configuration mode
Show contents of configuration
Alarm Management and Logging Correlation Commands
Description
Specifies the logging correlator buffer size.
Specifies a severity level for logging alarm messages.
Specifies the logging events buffer capacity threshold
that, when surpassed, will generate an alarm.
Displays configuration and operational messages
about the logging events buffer.
OL-24735-01