Table of Contents
Advertisement
show performance-mgmt bgp
show performance-mgmt bgp
To display performance management (PM) data from Border Gateway Protocol (BGP) entity instance
monitoring or statistics collections, use the show performance-mgmt bgp command in EXEC mode.
show performance-mgmt {monitor| statistics} bgp {ip-address| all} {sample-id| all-samples| last-sample}
Syntax Description
monitor
statistics
ip-address
all
sample-id
all-samples
last-sample
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Task ID
Task ID
monitor
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
400
Displays the data collected for an entity instance monitoring collection. The
data gathered is from one sample cycle of a BGP statistics collection template.
The data is available only as the monitor data is enabled.
Displays the data collected from statistics collection samples.
IP address of a BGP peer.
Displays all BGP peer instances.
Note
This option is available only with the statistics keyword. It is not
available with the monitor keyword because an entity instance
monitoring collection captures data from an entity instance for one
sampling cycle.
Sample ID of the monitoring or statistics collection to be displayed.
Displays all collected samples.
Displays the last collected samples.
Modification
This command was introduced.
Operations
read
Performance Management Commands
OL-24735-01
Advertisement
Table of Contents
