Table of Contents
Advertisement
timeout (IP SLA)
The IP SLA responder needs at least one second to open a socket and program Local Packet Transport
Note
Services (LPTS). Therefore, configure the IP SLA timeout to at least 2000 milli seconds.
Task ID
Task ID
monitor
Examples
The following example shows how to use the timeout command in IP SLA UDP jitter configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp jitter
RP/0/0/CPU0:router(config-ipsla-udp-jitter)# timeout 10000
The following example shows how to use the timeout command in IP SLA MPLS LSP monitor configuration
mode:
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# monitor 2
RP/0/0/CPU0:router(config-ipsla-mplslm-def)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-ping)# timeout 10000
Related Commands
Command
operation, on page 174
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
278
IP Service Level Agreement Commands
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
OL-24735-01
Advertisement
Table of Contents
