Show Performance-Mgmt Mpls - Cisco XR 1200 series Command Reference Manual

Performance Management Commands

show performance-mgmt mpls

To display performance management (PM) data for Multiprotocol Label Switching (MPLS) entity instance
monitoring and statistics collections, use the show performance-mgmt mpls command in EXEC mode.
show performance-mgmt {monitor| statistics} mpls ldp {ip-address| all} {first-sample-id| all-samples|
last-sample}
Syntax Description
monitor
statistics
ldp
ip-address
all
first-sample-id
all-samples
last-sample
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.2
Release 3.3.0
OL-24735-01
Displays the data collected for an entity instance monitoring collection. The
data gathered is from one sample cycle from one instance of an MPLS entity
collection template.
The data is available to be displayed only as the monitor data is
Note
collected.
Displays the data collected from statistics collection samples.
Displays data from MPLS Label Distribution Protocol (LDP) collections.
IP address of LDP session instance.
Displays data from all LDP session instances.
Note This option is available only with the statistics keyword. It is not
available with the monitor keyword because a entity instance
monitoring collection captures data from an entity instance for one
sampling cycle.
Sample ID of the monitoring or statistics collection to be displayed.
Displays all collected samples.
Displays the last collected samples.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
Removed support for MPLS interfaces.
show performance-mgmt mpls
405