Cisco XR 1200 series Command Reference Manual page 72

show logging events buffer
Command History
Release
Release 3.2
Usage Guidelines
This command displays messages from the logging events buffer matching the description. The description
is matched when all of the conditions are met.
Task ID
Task ID
logging
Examples
This is the sample output from the show logging events buffer all-in-buffer command:
RP/0/0/CPU0:router# show logging events buffer all-in-buffer
#ID
#1
VRAM_VAR : ROMMON variable-value pair: '^['[19~CONFIG_FILE = disk0:config/startup, contains
illegal (non-printable)characters
#2
is going to bid state.
#3
Card is becoming active.
#4
CARDS : RP going active; resetting all linecards in chassis
#5
card going active
#6
Failover has been enabled by config
This table describes the significant fields shown in the display.
Table 6: show logging correlator buffer Field Descriptions
Field
#ID
C_id.
Source
Time
%CATEGORY-GROUP-SEVERITY-MESSAGECODE
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
60
:C_id:Source :Time
: :RP/0/0/CPU0:Jan 9 08:57:54 2004:nvram[66]: %MEDIA-NVRAM_PLATFORM-3-BAD_N
: :RP/0/0/CPU0:Jan 9 08:58:21 2004:psarb[238]: %PLATFORM-PSARB-5-GO_BID : Card
: :RP/0/0/CPU0:Jan 9 08:58:22 2004:psarb[238]: %PLATFORM-PSARB-5-GO_ACTIVE :
: :RP/0/0/CPU0:Jan 9 08:58:22 2004:psarb[238]: %PLATFORM-PSARB-6-RESET_ALL_LC_
: :RP/0/0/CPU0:Jan 9 08:58:22 2004:redcon[245]: %HA-REDCON-6-GO_ACTIVE : this
: :RP/0/0/CPU0:Jan 9 08:58:22 2004:redcon[245]: %HA-REDCON-6-FAILOVER_ENABLED :
Alarm Management and Logging Correlation Commands
Modification
This command was introduced.
Operations
read
:%CATEGORY-GROUP-SEVERITY-MESSAGECODE: Text
Description
Integer assigned to each event in the logging events
buffer.
Correlation ID assigned to a event that has matched
a logging correlation rule.
Node from which the event is generated.
Date and time at which the event occurred.
The category, group name, severity level, and
message code associated with the event.
OL-24735-01