All-Alarms - Cisco XR 1200 series Command Reference Manual

all-alarms

all-alarms
To configure a logging suppression rule to suppress all types of alarms, use the all-alarms command in logging
suppression rule configuration mode.
all-alarms
Syntax Description
This command has no keywords or arguments.
Command Default
No alarm types are configured by default.
Command Modes
Logging suppression rule configuration
Command History
Release
Release 3.8.0
Usage Guidelines
Task ID
Task ID
logging
Examples
This example shows how to configure the logging suppression rule commit to suppress all alarms:
RP/0/0/CPU0:router(config)# logging suppress rule commit
RP/0/0/CPU0:router(config-suppr-rule)# all-alarms
Related Commands
Command
logging suppress rule, on page 37
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
4
Alarm Management and Logging Correlation Commands
Modification
This command was introduced.
Operations
read, write
Description
Creates a logging suppression rule.
OL-24735-01