Cisco XR 1200 series Command Reference Manual page 199

IP Service Level Agreement Commands
Task ID
Task ID
monitor
Examples
The following example shows how to configure MPLS LSP path parameters:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-def)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-ping)# path discover
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-lpd)# path retry 12
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-lpd)# path secondary frequency both 10
Related Commands
Command
path discover echo, on page 184
path discover scan, on page 188
path discover session, on page 190
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Operations
read, write
Description
Configures MPLS LSP echo parameters.
Configures MPLS LSP scan parameters.
Configures MPLS LSP session parameters.
path discover path
187