Logging Facility - Cisco XR 1200 series Command Reference Manual

logging facility

logging facility
To configure the type of syslog facility in which system logging (syslog) messages are sent to syslog servers,
use the logging facility command in global configuration mode. To remove the logging facility command
from the configuration file and disable the logging of messages to any facility type, use the no form of this
command.
logging facility [ type ]
no logging facility
Syntax Description
type
Command Default
type: local7
Command Modes
Global configuration
Command History
Release
Release 3.2
Usage Guidelines
This table describes the acceptable options for the type argument.
Table 30: Facility Type Descriptions
Facility Type
auth
cron
daemon
kern
local0
local1
local2
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
322
(Optional) Syslog facility type. The default is local7. Possible values are listed under
30: Facility Type Descriptions , on page
322in the "Usage Guidelines" section.
Modification
This command was introduced.
Description
Authorization system
Cron/at facility
System daemon
Kernel
Reserved for locally defined messages
Reserved for locally defined messages
Reserved for locally defined messages
Logging Services Commands
Table
OL-24735-01