Table of Contents
Advertisement
IP Service Level Agreement Commands
threshold type immediate
To take action immediately upon a threshold violation, use the threshold type immediate command in the
appropriate configuration mode. To clear the threshold type (reaction will never happen), use the no form of
this command.
threshold type immediate
no threshold type
Syntax Description
This command has no keywords or arguments.
Command Default
If there is no default value, no threshold type is configured.
Command Modes
IP SLA reaction condition configuration
IP SLA MPLS LSP monitor reaction condition configuration
Command History
Release
Release 3.3.0
Release 3.5.0
Usage Guidelines
When the reaction conditions, such as threshold violations, are met for the monitored element, the action is
immediately performed as defined by the action command.
If the threshold type immediate command is used in IP SLA reaction condition mode, it configures the
threshold for the specific operation being configured. If the threshold type immediate command is used in
IP SLA MPLS LSP monitor reaction condition configuration mode, it configures the threshold for all operations
associated with the monitored provider edge (PE) routers. This configuration is inherited by all LSP operations
that are created automatically.
Task ID
Task ID
monitor
Examples
The following example shows how to use the threshold type immediate command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
OL-24735-01
Modification
This command was introduced.
This command was added to IP SLA MPLS LSP monitor reaction
condition configuration mode.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Operations
read, write
threshold type immediate
273
Advertisement
Table of Contents
