Cisco XR 1200 series Command Reference Manual page 380

monitor interface
i
p
n
q
Task ID
Task ID
basic-services
monitor
Examples When more than one interface is specified, the statistics for each interface are displayed on a separate line.
This display format appears anytime more than one interface is specified. For example:
• To display statistics for all interfaces, enter the command monitor interface .
• To display all the interfaces for an interface type, such as all POS interface, enter the command and
• To display statistics for three specified interfaces, enter the command monitor interface pos0/2/0/0
This is the sample output for the monitor interface command entered without an argument. This command
displays statistics for all interfaces in the system.
RP/0/0/CPU0:router# monitor interface Protocol:General
0/ 0%
0%
350/ 0%
0% 346/ 0%
(General='g',
Time:
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
368
wildcard monitor interface pos * .
pos0/5/0/1 pos0/5/0/2 .
Rack6-1 Monitor Time: 00:00:01 SysUptime: 165:52:41 Interface In(bps) Out(bps)
InBytes/Delta OutBytes/Delta Mg0/0/CPU0/0 1500/ 0% 7635/ 0% 58.4M/420 8.1M/2138
PO0/4/0/0 578/ 0% 535/ 0% 367.2M/162 377.5M/150 PO0/4/0/1 278/ 0% 0/ 0% 345.7M/78
360.1M/0 Gi0/5/0/1 3128/ 0% 2171/ 0% 382.8M/876 189.1M/608 Gi0/5/0/1.1 0/ 0%
824.6G/0 1.0T/0 Gi0/5/0/1.2 0/ 0% 0/ 0% 1.0T/0 824.6G/0 Gi0/5/0/1.3 678/ 0% 0/
1.0T/190 1.0T/0 Gi0/5/0/1.4 0/ 0% 0/ 0% 824.6G/0 824.6G/0 Gi0/5/0/1.5 0/ 0%
824.6G/0 1.0T/98 Gi0/5/0/1.6 327/ 0% 348/ 0% 824.6G/92 1.0T/98 Gi0/5/0/1.7 0/
824.6G/0 1.0T/98 Gi0/5/0/1.8 325/ 0% 0/ 0% 824.6G/92 1.0T/0 Quit='q', Clear='c',
Freeze='f', Thaw='t', Next set='n', Prev set='p', Bytes='y', Packets='k'
IPv4 Uni='4u', IPv4 Multi='4m', IPv6 Uni='6u', IPv6 Multi='6m') Rack6-1 Monitor
00:00:01 SysUptime: 165:52:41 Protocol:IPv4 Unicast Interface In(bps) Out(bps)
InBytes/Delta OutBytes/Delta Mg0/0/CPU0/0 0/ 0% 0/ 0% 85.3M/0 6.9M/0 PO0/4/0/0
Performance Management Commands
Enables you to jump to a nonsequential interface. You
are prompted to enter the interface type and interface
path ID to be monitored.
Displays the previous sequential interface in the list
of available interfaces.
Displays the next sequential interface in the list of
available interfaces.
Terminates the interface monitoring session.
Operations
execute
read
OL-24735-01