Cisco XR 1200 series Command Reference Manual page 173

IP Service Level Agreement Commands
monitor mode, it acts on the MPLS echo requests for all operations associated with the monitored provider
edge (PE) routers.
Task ID
Task ID
monitor
Examples
The following example shows how to use the lsp selector ipv4 command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type mpls lsp trace
RP/0/0/CPU0:router(config-ipsla-mpls-lsp-trace)# lsp selector ipv4 127.10.10.1
Related Commands
Command
operation, on page 174
schedule operation, on page 215
type mpls lsp ping, on page 286
type mpls lsp trace, on page 288
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
Tests connectivity in an LSP path in an MPLS VPN.
Traces the hop-by-hop route of an LSP path in an
MPLS VPN.
lsp selector ipv4
161